Construction worker cutting a ceramic tileCeramic tiles are the most popular choice for the flooring of properties nowadays. These tiles work for virtually all rooms though they are usually used in kitchens, bathrooms foyers, and mudrooms. The tiles are durable, water-resistant, inexpensive, are easy to maintain, and come in many designs.

Unlike other flooring options, they are also allergen-free and hence ideal for flooring in hospitals and commercial buildings. The primary drawback of ceramic tiles lies in their installation since the tiles are bulky and hard to cut.

Thankfully, you can solve this drawback with the right tool from tile cutter suppliers. The ideal tool for your ceramic tiles’ cut primarily depends on the type of cut you want to make. Here is some info to help you match your tool options to your kind of ceramic tile cut.

High-Quality and High-Quantity Cuts

If you are aiming to cut a lot of ceramic tiles and you want the cuts you make to be perfect and straight, a wet table-top saw is your best option. This saw resembles the one used for cutting wood, but unlike the latter, it has a carbon blade and a continuous water stream.

The water is used to continually cool the saw as you cut and wash away the debris from the cut you make thus giving you a clear view of your work area.

Installed Tile Cuts

Worker cutting tilesDifferent cases might necessitate the need to cut a portion of or an entire ceramic tile that has already been installed. An oscillating multi-tool, manual wet tile saw or regular tile blade circular saw make perfect choices for the cut. The manual wet saw offers the cleanest cuts.

The dry circular saw with a diamond blade can also handle the job but results in a dusty work surface and flying shards. The oscillating multi-tool, on the other hand, is best suited for cutting the grout which binds the tile you are cutting to other tiles.

Corners and Curves

For those looking to nip off a small portion on an individual tile, a tile nipper is your best choice. The nipper resembles a set of pliers with springs throughout its length apart from its “jaw end”. This end comprises two hardened carbide blades which are dull to allow the systematic nibbling of your tile to create curves.

Centre Holes

Creating centre holes in your ceramic tiles is generally needed for the accommodation of taps in kitchen and bathroom tiles. For this task, a spiral saw will suffice.

The saw resembles a rotating drill bit but it moves faster than the drill bit, and its sides are covered with diamond grit to withstand the hard surface of ceramic tiles. Most spiral saws for ceramic tiles have a range of bits to make different sizes of holes.

With the right cutting tool, there is no limit to the type of cuts you can make in your ceramic tile. The quality of the kinds of ceramic tile cuts and others primarily depends on the quality of your cutting tool. Many stores are touting as authentic tool suppliers, but your best choice is an experienced supplier.